Mioty RF Transceiver EVK

WD-QLHM EVK-1

WD-QLHM EVK is added with sensors and necessary components based on the WD-QLHM module, and provide streamlined test firmware to quickly assess the module efficiency.

Description

The wireless connection protocol of the WD-QLHM module is Mioty can connect to the network and transfer data in accordance with the specified Mioty Region and the corresponding Mioty Gateway. WD-QLHM EVK is added with sensors and necessary components based on the WD-QLHM module, and provide streamlined test firmware to quickly assess the module efficiency.

Specification

WD-QLHM Module
Frequency Band: 868MHz / 915MHz
Dimension: 12(W)×12(L)×2.45(H) mm 36pins SMD
Antenna: External
Temperature Range: -40°C ~ +85°C
Supply Voltage: 3.3 V Type (1.8 V ~ 3.6 V)
TX Power: Transmitter max output power +13 dBm
Transmitter Current: 25.5mA @ Max output power in 868MHz type (50 Ω), 23mA @ Max output power in 915MHz type (50 Ω)
Sleep Current: Less than 2uA
Modulation: (G)MSK
Protocol: TS-UBN (Mioty)
Mioty Profile: EU0, EU1, EU2, US0
Topology: Star
Symbol Rate: (ULP-Mode) 2 380,371 Sym/s
PHY Data Rates: (ULP-Mode) 512 bit/s

★ Unidirectional transmission (Uplink) only.

WD-QLHM EVK
Antenna: SMA Connector
PCB dimension:28.45×56.85 (mm)
Work temperature: -40°C ~ 85°C
Sensor: 1 thermometer / hygrometer
Buttons × 2
Interface feature: 1 set of Micro USB
Flexible power management: AA battery (alkaline battery)

Download
EVK Starter Kits
AT Commands Reference Guide
EVK入門套件說明書
AT命令參考指南
EVK USB Driver

Contact Us

2 + 5 = ?